Perfect piles can be formed on pallets which run on rails for pre-load system. This makes a significant contribution to smooth production and let operator move the prepared pile to feeder accurately and conveniently. Single position engagement pneumatic operated mechanical clutch insures the first sheet after every re-start of machine is always fed to front lays for easy, time-saving and material-saving make-ready. The side lays can be switched directly between pull and push mode on both sides of the machine simply by turning a bolt without having to add or remove parts. This provides the flexibility for processing a wide range of material: irrespective of whether the register marks are to the left or right of the sheet.
High quality feeder head
Centre line system
Pneumatic lock die chase
Non-stop feeding and delivery
7500Sheets/H
Max.300T pressure
Dual touch screen for easy operation
HT500-7 ductile casting iron
High quality feeder with 4 suckers for lifting paper and 4 suckers for forwarding paper ensure stable and fast feeding paper. The height and angle of suckers are easily adjustable to keep sheets absolutely straight.
Mechanical double-sheet detector, sheet-retarding device, adjustable air blower ensure sheets transfer to the belt table steadily and precisely.
Vacuum pump is from German Becker.
Pile adjustment in transverse direction is controlled by motor for accurate sheet feeding.
Pre-load system, non-stop feeding, high pile (Max. pile height is up to 1600mm).
Perfect piles can be formed on pallets which run on rails for pre-load system. This makes a significant contribution to smooth production and let operator move the prepared pile to feeder accurately and conveniently.
Single position engagement pneumatic operated mechanical clutch insures the first sheet after every re-start of machine is always fed to front lays for easy, time-saving and material-saving make-ready.
The side lays can be switched directly between pull and push mode on both sides of the machine simply by turning a bolt without having to add or remove parts. This provides the flexibility for processing a wide range of material: irrespective of whether the register marks are to the left or right of the sheet.
Side and front lays are with precision optical sensors, which can detect dark color and plastic sheet. The sensitivity is adjustable.
Optical sensors with automatic stop system on feeding table enable you to optimize system monitoring- for comprehensive quality control over the entire sheet width and paper jam.
Operation panel for feeding part is easier to control the feeding process with LED displayer.
Separate drive controls for main pile and auxiliary pile
PLC and electronic cam for timing control
Anti-obstacle device can avoid the machine damage.
Swiss Rapplon convey belt for feeder and the speed is adjustable
Pneumatic lock system makes easier lock-up and release of cutting chase and cutting plate.
Pneumatic lifting cutting plate for easy slide in and out.
Centerline system on die-cutting chase with transversal micro adjustment ensures accurate registration that result in quick job changeover.
Accurate positioning of Cutting chase controlled by precision optical sensors with automatic check-lock device
Cutting chase turnover device
Siemens main motor controlled by Schneider inverter.
Micro-adjustment of cutting force （pressure accuracy can be up to 0.01mm of encoder, Max. die-cutting pressure can be up to 300 tons） by worm gear driven by servo motor and controlled easily by 15 inch touch screen.
Crankshaft is made of 40Cr steel.
HT300 ductile iron for machine frames and platens
7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registration.
Uniquely designed gripper bar need no spacer for compensation to insure accurate paper registration
High quality Renold chain from England with pre-extended treatment ensures stability and accuracy in long run.
High pressure index drive system for gripper bar positioning control
Overload protection device with torque limiter creates the highest level of security for operator and machine.
Automatic lubrication and cooling system for main drive and automatic lubrication for main chain.
FEEDER HEAD High quality feeder, 4 sucker and 4 forwarder
FEEDER Pre-pile device, Non-stop feeding Max. Pile height 1600mm
AIR PUMP German BECKER
FEEDING TABLE Nitta convey belt Stainless steel slope convey table
STRIPPING SECTION Center line system Pneumatic upper chase lifting Separate cam to control position for upper, middle, lower chase Higher product quality by automatic stripping
DIE-CUTTING SECTION Servo motor from Japan FUJI Pressure can be adjusted on 15” touch screen, adjusting tolerance up to 0.01mm Max.300T pressure
LED TOUCH SCREEN MONITOR ●15” high definition LED touch screen , the operator can observe all the settings in different position, reduce the time for job changing and improve working efficiency.
LUBRICATION SYSTEM Automatic lubrication system controlled by computer Easy maintanance
DIE-CUTTING SECTION Centre line system Pneumatic lock for upper and lower die chase Switch to detect plates are locked in right position
- C 80 / C 80 Q / C 106 / C 106 Q / C 80 H / C 106 H
-
Machine Parameter
Model C 80 C 80 Q C 106 C 106 Q C 80 H C 106 H Max. sheet size 800× 600 mm 800× 600 mm 1060× 760 mm 1060× 760 mm 800× 600 mm 1060× 760 mm Min. sheet size 300× 260 mm 300× 260 mm 450× 370 mm 450× 370 mm 300× 260 mm 450× 370 mm Max. cutting size 785× 585 mm 785× 585 mm 1045× 745 mm 1045× 745 mm 785× 585 mm 1045× 745 mm Die size 840× 620 mm 840× 620 mm 1100× 770 mm 1100× 770 mm 840× 620 mm 1100× 770 mm Cutting plate 3+1 mm 3+1 mm 3+1 mm 3+1 mm 3+1 mm 3+1 mm Height of die-cutting rule 23.8 mm 23.8 mm 23.8 mm 23.8 mm 23.8 mm 23.8 mm First cutting rule 13 mm 13 mm 23 mm(The height is 13 when adopting attached cushion pad) 23 mm(The height is 13 when adopting attached cushion pad) 13 mm 13 mm Gripper margin 7-17 mm 7-17 mm 7-17 mm 7-17 mm 7-17 mm 7-17 mm Carton board 90-2000 g/㎡ 90-2000 g/㎡ 90-2000 g/㎡ 90-2000 g/㎡ 90-2000 g/㎡ 90-2000 g/㎡ Carton board 0.1-3 mm 0.1-3 mm 0.1-3 mm 0.1-3 mm 0.1-3 mm 0.1-3 mm Corrugated board ≤4 mm ≤4 mm ≤4 mm ≤4 mm ≤4 mm ≤4 mm Max. cutting force 150 t 150 t 300 t 300 t 150 t 300 t Max. die-cutting speed 7500 S/H 7500 S/H 7500 S/H 7500 S/H 7500 S/H 7500 S/H Accuracy ±0.075 mm ±0.075 mm ±0.075 mm ±0.075 mm ±0.075 mm ±0.075 mm Feeder pile height (incl. pallet) 1300 mm 1300 mm 1600 mm 1600 mm 1300 mm 1600 mm Delivery pile height (incl. pallet) 1050 mm 1050 mm 1350 mm 1350 mm 1050 mm 1350 mm Main motor power 7.5 KW 7.5 KW 11 KW 11 KW 7.5 KW 11 KW Machine power 16 KW 16 KW 20 KW 20 KW 34 KW 48 KW Voltage 380±5% V 380±5% V 380±5% V 380±5% V 380±5% V 380±5% V Cable 6 m㎡ 6 m㎡ 6 m㎡ 6 m㎡ 10 m㎡ 10 m㎡ Compressed air 6-8 bar 6-8 bar 6-8 bar 6-8 bar 6-8 bar 6-8 bar Air flow 180 L/Min 180 L/Min 200 L/Min 200 L/Min 180 L/Min 200 L/Min -
Installation data
Model C 80 C 80 Q C 106 C 106 Q C 80 H C 106 H A Overall machine length 4594 mm 5510 mm 5055 mm 6045 mm 4594 mm 4594 mm B Overall machine width 3620 mm 3620 mm 4250 mm 4250 mm 3620 mm 3620 mm C Overall machine height 2150 mm 2150 mm 2430 mm 2430 mm 2150 mm 2150 mm D Feeder length 2170 mm 2170 mm 2475 mm 2475 mm 2170 mm 2170 mm E Die-cutting length 1256 mm 1256 mm 1330 mm 1330 mm 1256 mm 1256 mm F Stripping length – 915 mm – 990 mm – – G Delivery unit length 1140 mm 1140 mm 1250 mm 1250 mm 1140 mm 1140 mm H Machine width 1920 mm 1920 mm 2250 mm 2250 mm 1920 mm 1920 mm I Cat walk way width 1700 mm 1700 mm 2000 mm 2000 mm 1700 mm 1700 mm J Aisle for paper feeding 2500 mm 2500 mm 3000 mm 3000 mm 2500 mm 2500 mm K Aisle of machine side 800 mm 1200 mm 1000 mm 1500 mm 800 mm 800 mm L Aisle for paper delivery 2000 mm 2000 mm 2500 mm 2500 mm 2000 mm 2000 mm Net weight 11.8 t 13 t 17 t 18.5 t 11.8 t 11.8 t Packing size length 4790 mm 5700 mm 5110 mm 6500 mm 4790 mm 4790 mm Packing size width 2080 mm 2080 mm 2300 mm 2300 mm 2080 mm 2080 mm Packing size height 2300 mm 2300 mm 2530 mm 2530 mm 2300 mm 2300 mm
Reviews
There are no reviews yet.