The side lays can be switched directly between pull and push mode on both sides of the machine simply by turning a bolt without having to add or remove parts. This provides the flexibility for processing a wide range of material: irrespective of whether the register marks are to the left or right of the sheet.
Side and front lays are with precision optical sensors, which can detect dark color and plastic sheet. The sensitivity is adjustable.
Optical sensors with automatic stop system on feeding table enable you to optimize system monitoring- for comprehensive quality control over the entire sheet width and paper jam.
Operation panel for feeding part is easier to control the feeding process with LED display.
FEEDER HEAD High quality feeder, 4 sucker and 4 forwarder
FEEDER Pre-pile device, Non-stop feeding Max. Pile height 1600mm
AIR PUMP German BECKER
FEEDING TABLE Nitta convey belt Stainless steel slope convey table
STRIPPING SECTION Center line system Pneumatic upper chase lifting Separate cam to control position for upper, middle, lower chase Higher product quality by automatic stripping
DIE-CUTTING SECTION Servo motor from Japan FUJI Pressure can be adjusted on 15” touch screen, adjusting tolerance up to 0.01mm Max.300T pressure
LED TOUCH SCREEN MONITOR ●15” high definition LED touch screen , the operator can observe all the settings in different position, reduce the time for job changing and improve working efficiency.
LUBRICATION SYSTEM Automatic lubrication system controlled by computer Easy maintanance
DIE-CUTTING SECTION Centre line system Pneumatic lock for upper and lower die chase Switch to detect plates are locked in right position
DELIVERY Max. Pile height 1350mm Non-stop delivery
High quality feeder made in China with 4 suckers for lifting paper and 4 suckers for forwarding paper ensure stable and fast feeding paper. The height and angle of suckers are easily adjustable to keep sheets absolutely straight.
Mechanical double-sheet detector, sheet-retarding device, adjustable air blower ensure sheets transfer to the belt table steadily and precisely.
Vacuum pump is from German Becker.
Lateral pile can be adjusted by motor for accurate sheet feeding.
Pre-piling device makes non-stop feeding with high pile (Max. pile height is up to 1600mm).
Perfect piles can be formed on pallets which run on rails for pre-piling. This makes a significant contribution to smooth production and let operator move the prepared pile to feeder accurately and conveniently.
Single position engagement pneumatic operated mechanical clutch insures the first sheet after every re-start of machine is always fed to front lays for easy, time-saving and material-saving make-ready.
The side lays can be switched directly between pull and push mode on both sides of the machine simply by turning a bolt without having to add or remove parts. This provides the flexibility for processing a wide range of material: irrespective of whether the register marks are to the left or right of the sheet.
Side and front lays are with precision optical sensors, which can detect dark color and plastic sheet. The sensitivity is adjustable.
Optical sensors with automatic stop system on feeding table enable you to optimize system monitoring- for comprehensive quality control over the entire sheet width and paper jam.
Operation panel for feeding part is easier to control the feeding process with LED display.
Separate drive controls for main pile and auxiliary pile
PLC and electronic cam for timing control
Anti-obstacle device can avoid the machine damage.
Japan Nitta convey belt for feeder and the speed is adjustable
Pneumatic lock system makes easier lock-up and release of cutting chase and cutting plate.
Pneumatic lifting cutting plate for easy slide in and out.
Centerline system on die-cutting chase with transversal micro adjustment ensures accurate registration that result in quick job changeover.
Accurate positioning of Cutting chase controlled by precision optical sensors with automatic check-lock device
Cutting chase turnover device
Siemens main motor controlled by Schneider inverter.
Micro-adjustment of cutting force （pressure accuracy can be up to 0.01mm, Max. die-cutting pressure can be up to 400 tons） by worm gear driven by servo motor and controlled easily by 15 inch touch screen.
Crankshaft is made of 40Cr steel.
HT300 ductile iron for machine frames and platens
7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registration.
High quality gripper bar from Japan with long life
Uniquely designed gripper bar need no spacer for compensation to insure accurate paper registration
Cutting plates of different thickness(1pc of 1mm, 1 pc of 4mm, 1 pc of 5mm) for easy job-changing
High quality Renold chain from England with pre-extended treatment ensures stability and accuracy in long run.
High pressure index drive system for gripper bar positioning control
Overload protection device with torque limiter creates the highest level of security for operator and machine.
Automatic lubrication and cooling system for main drive and automatic lubrication for main chain.
Operation platform with heating controller; 1 set of tools box and operation manual.
R 130 / R 130 Q
-
Machine Parameter
Model R 130 R 130 Q Max. sheet size 1300 × 950 mm 1300 × 950 mm Min. sheet size 550 × 450 mm 550 × 450 mm Max. cutting size 1285 × 935 mm 1285 × 935 mm Die size 1340 × 960 mm 1340 × 960 mm Cutting plate 4+1 mm 4+1 mm Height of die-cutting rule 23.8 mm 23.8 mm First cutting rule 13 mm 13 mm Gripper margin 7-17 mm 7-17 mm Carton board 90-2000 g/㎡ 90-2000 g/㎡ Carton board 0.1-3 mm 0.1-3 mm Corrugated board ≤4 mm ≤4 mm Max. cutting force 450 t 450 t Max. die-cutting speed 6500 S/H 6500 S/H Accuracy ±0.075 mm ±0.075 mm Feeder pile height (incl. pallet) 1600 mm 1600 mm Delivery pile height (incl. pallet) 1350 mm 1350 mm Main motor power 15 KW 15 KW Voltage 380±5% V 380±5% V Cable 10 m㎡ 10 m㎡ Compressed air 6-8 bar 6-8 bar Air flow 220 L/Min 220 L/Min -
Installation data
Model R 130 R 130 Q A Overall machine length 5955 mm 5955 mm B Overall machine width 5460 mm 5460 mm D Feeder length 2800 mm 2800 mm E Die-cutting length 1720 mm 1720 mm F Stripping length – 1180 mm G Delivery unit length 1430 mm 1430 mm H Machine width 2460 mm 2460 mm I Cat walk way width 3000 mm 3000 mm J Aisle for paper feeding 3500 mm 3500 mm K Aisle of machine side 1000 mm 2000 mm L Aisle for paper delivery 2500 mm 2500 mm Net weight 27 t 30 t Packing size length 6300 mm 7500 mm Packing size width 2800 mm 2800 mm Packing size height 2630 mm 2680 mm
Reviews
There are no reviews yet.